The feed mixing mixer
is a small compound feed processing equipment specially designed for rural farmers, small feedlots, and small and medium-sized compound feed factories. It integrates vertical lifting, mixing bins, and horizontal feeding. It has a simple and compact structure, and is small and disposable. It has the advantages of investment, economical and practical, convenient maintenance and does not require special production sites. It can produce premixes, concentrates, full-price powders, etc. evenly mixed.
1. Feed Mixer
Features:
The feed mixer series includes vertical, vertical and horizontal models, which are suitable for feed processing by professional feed processing households and large, medium and small farms. This machine has advanced design, reasonable structure, reliable performance, easy maintenance, high production efficiency, small footprint, labor and time saving, less dust, and good sealing performance. It is the first choice and best product for the majority of breeding professionals to develop the economy and become rich.
2. The structure and working principle of the feed mixing mixer
The feed mixing mixer casing is welded with high-quality materials and the feed port on the top of the pulverizer can be connected with various forms The feeding structure matches the symmetrical arrangement of the hammers. When the feed machine is working, the material enters the crushing chamber. Under the action of the high-speed rotating hammer and the friction of the sieve plate, the material is gradually crushed and discharged through the bottom outlet under the action of centrifugal force and air flow.
3.> Feed mixing mixer
Usage and safety precautions:
In order to avoid accidental use of the machine during transportation, loading and unloading, all bolts and nuts must be inspected before use. Is the flat-toothed scalloped spindle nut loose? Turn the pulley by hand to check whether there is any collision on the machine.
Whether the machine rotates flexibly and whether there are any debris in the machine. Start the operation after idling for a few minutes without any abnormality.
When working, be sure to remove debris from the materials and strictly prohibit iron, stones and other objects from entering the machine to avoid damage to the machine and injury to people.
The material-connecting bag should have a length and diameter of more than 1 meter. The 1-meter fabric should not be too dense. During use, the material should be discharged in time to ensure that the bag has sufficient air permeability.
Feeding should be even and pay attention to the load level of the power to avoid choking. When crushing particulate matter, the pumping plate regulator can be used to adjust the feeding amount.
. Hammer type: When the wear of one corner affects the work efficiency, the hammer can be turned around from the opposite side (when turning around, the group is adjusted together to avoid causing unbalance of the rotor). When replacing the hammer, all hammers should be replaced.
. Grease should be added every day before starting the machine, and the bearing condition should be checked after hours of use. When installing the screen, the burr side should be installed on it. Select screen plates with different diameters according to the fineness of the crushed materials.
Main technical parameters:
Coefficient of variation of uniform mixing: % Noise in the working area of the unit:
Dust in the working area of the unit:/-Finished product type: Dry powder mixed feed
Operation Personnel: -person
Feed mixing mixer
Technical parameters:
<= dd: Project
Type
Type
Overall specifications (length*width*height)
**
**
Equipped power
Propeller speed (rev/min)
Propeller diameter
Motor speed (rev/min)
<= dd: Project
Power
Speed
Type
Rev/min
Type
Rev/min
Vertical multi-function mixer_1 ton mixer price_feed mixing mixer